WARNINGS AND MAINTENANCE

ATTENTION!
For optimal use of Moretti Compact products, carefully read the following warnings:

Moretti Compact products are water-resistant ; we recommend drying thoroughly immediately after cleaning. Never use solvent- base products such as trichloroethylene, acetone, ammonia, etc.

Direct and prolonged exposure to sunlight or the use of unsuitable detergents may cause deterioration not attributable to the manufacturer. NB: Slight chromatic variations in the materials are within the natural tolerance limits of the product.

  • The products are not suitable for outdoor use. Do not bring them into contact with water or place hot objects on the surfaces.
  • All assembly accessories must always be carefully tightened and checked periodically and re-tightened if necessary.
  • Direct and prolonged exposure to sunlight or the use of unsuitable detergents may cause deterioration not attributable to the manufacturer. NB: A slight chromatic variation of the materials is within the natural limits of tolerance of the product.
  • For greater safety, assembly must be carried out in the absence of children.
  • Turn the mattress periodically to allow for perfect ventilation and to ensure a longer life for the mattress.
  • Any spare parts can be requested from the Dealer. The use of parts that do not comply with the Manufacturer's construction directives is prohibited.
  • DO NOT make any changes that could compromise the stability of the structure
  • Do not leave open flames or other sources of strong heat, such as electric or gas heaters, etc., in the direct vicinity of the bed.
  • NB: it fears water, it is recommended to dry carefully immediately after cleaning.
  • For cleaning, DO NOT use solvent- base products such as trichloroethylene, acetone, ammonia, etc. under any circumstances.

Maintenance Tips

Moretti Compact products do not require any particular maintenance, except:

  • a periodic check of all assembly-related accessories, which must always be carefully tightened, or re-tightened if necessary.
  • possible fine-tuning of the opening of the doors and drawers, which is achieved by acting respectively on the hinges and the sliding guides with the appropriate adjustment screws.

Sliding wardrobe doors

SLIDING WOODEN CLOSET DOORS

Adjusting tensioners for warped doors

There are tensioners on the inside of the doors that can be used to straighten a warped door. Using the supplied key, turning it clockwise pushes the door outward, while turning it counterclockwise pushes it inward.

SLIDING WARDROBE DOORS WITH ALUMINUM PROFILES

Adjusting tensioners for warped doors

At the top of the doors, inside the aluminum profiles, there are tensioners that can be used to straighten a warped door. Using the supplied hex key, turning it clockwise will push the door outward, while turning it counterclockwise will push it inward.

SLIDING WARDROBE DOORS WITH ALUMINUM PROFILES

Sliding door tilt adjustment

By acting on the screw located on the upper carriages of the sliding doors it is possible to correct the vertical inclination of the door.

Hinged wardrobe doors

Width adjustment

Height adjustment

Depth adjustment

Kosmos living room swing doors

Width adjustment

Height adjustment

Depth adjustment

Vasistas opening door

Vasistas power regulation

Tilt-and-turn door

Height adjustment

Drawers

“Blum” guide adjustment

  1. Antisganciamento: Per sfilare il cassetto occorre sganciare le spine poste su entrambe le guide.
  2. Regolazione in altezza: Ruotando la levetta si regola l’altezza del cassetto, ovvero la distanza fra cassetto e cassetto.
  3. Regolazione in profondità (solo guide Push-Pull): Agendo sulla rotellina è possibile regolare la distanza tra frontale cassetto e struttura del mobile.

“Hettich” guide adjustment

Regolazione in altezza: Agendo sulla rotellina indicata è possibile regolare l’altezza del cassetto.

Cleaning Tips

Melamine faced surfaces

We recommend cleaning with neutral detergents (not aggressive or abrasive) or soft cloths dampened with water. Dry thoroughly immediately after cleaning.

Lacquered surfaces

We recommend cleaning with neutral detergents (not aggressive or abrasive) or soft cloths dampened with water. Dry thoroughly immediately after cleaning.

Plastic parts

Si consiglia di effettuare la pulizia con detersivi neutri (non aggressivi o abrasivi) o panni morbidi inumiditi con acqua. Si raccomanda di asciugare con cura subito dopo la pulizia.

FABRICS AND PADDING

Please refer to the labels on the various fabric components.

Generata in 15 millesimi di secondo